Rear Mustache Bar Bushings. 63mm O.D. 2nd Gen Turbo & 3rd Gen Subaru

This is a set of Rear Differential Cross member "Mustache Bar" Mount Bushings for Subaru SVX and RX. I've also found this 63mm O.D. size of Mustache Bar Bushing to fit SOME 84-89 Subaru Turbo models (GL/DL/GL-10/Leone). And some 3rd Gen models (GL, DL, Loyale, L-Series, Omega etc.) But most of these seem to have the smaller 49mm mounts which are listed seperately

These are a larger size than what is on the BRAT and other 2nd Gen Subaru Cars

D1059-SUB-DT 
- 1 Set needed per car.

Made of 70A shore hardness polyurethane rubber. More durable and crack resistant than OEM rubber. Although 70A polyurethane is still flexible, it is slightly more firm than the factory rubber. This will result in sharper/better handling, but it can also cause a slight increase in vibration transfer.

Lubricating grease is supplied with all bushing orders. All contact surfaces of the new bushings and steel sleeves should be thoroughly lubricated before installation for easier installation, smooth/quiet operation and long bushing life.

Due to the several custom options, nearly all items are made to order. Therefore, there could be up to a 10 business day production time on some orders before they ship.

Please message me if you have any questions about this item fitting your specific vehicle or for any other questions.

Color Disclaimer. The formulation of polyurethane that I use to make bushings is chosen because of its high physical strength properties. An unfortunate downside of this type of polyurethane is that it can darken or discolor over time. Especially if it is exposed to UV light. This discoloration has no affect on physical properties but it only aesthetic. I highly recomend not leaving the bushings exposed to sunlight before they are installed. Obviously once installed, sunlight exposure isn't much of an issue but darkening may still occur.